| 号 | CAS号 | 编号 | 包装 | 参数 |
| 100184 | 12138-09-9 | XF061 | 100g | 纯度99% 粒径范围：0.4-1微米 |
WS2 Micropowder平均粒径范围：0.4-1微米
纯度> 99%
Properties:Average Particle Size: 0.4-1 microns
Purity: 99%
WS2 Micropowder is useful for creating WS2 solutions with applications ranging from electronics to energy storage. The powder may be sonicated in a range of liquid solvents, whereas the longer sonication takes place, the smaller the flake size in solution. Further, before sonication the solution will be silvery, and after it will turn a greenish-yellow. The solvents useful during sonication include benzyl benzoate, isopropanol, acetone, methanol, and many others.
The liquid dispersion may then be used to create a thin film on the substrate of your choosing. These thin-films have a range of applications, such as transistors, solar cells, and energy storage devices.
WS2 solution can also be used in composite materials.
The difference between our micropowders and ultrafine powders are their flake sizes. Ultrafine powders have smaller flakes, and create dispersions with smaller particle sizes after sonication than micropowder. Micropowders require more sonication and will result in flakes with larger lateral dimensions. Micropowder is a low-cost alternative to our ultrafine powder.
WS2Micropowder SEM image
Applications:Transparent and Flexible Electronics
Transistors
Composite Materials
Chemical and bio-sensors
Semiconductor printable inks
Academic References:Electrical Characteristics of Molybdenum Disulfide Flakes Produced by Liquid Exfoliation, Lee et al. Adv. Mater. 2011, 23, pp. 4178-4182
Gelatin-assisted fabrication of water-dispersible graphene and its inorganic analogues, Ge et al. J. Mater. Chem. 2012, 22, pp. 17619-17624
Preparation of High Concentration Dispersions of Exfoliated MoS2 with Increased Flake Size, O.Neill et al. Chem. Mater. 2012, 24, pp. 2414-2421
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials, Coleman et al. Science, 2011, 331, pp. 568-571
1371 
咨询底价
贵州 - 贵阳
2026年08月06日 ~ 08日
